Dust Control Policy

  1. Contractor Requirements
  2. Processes & Procedures
  3. Approved Suppliers
Contractor Requirements
Washington County requires that each contractor who wishes to do dust control work within the right of way in Washington County first be pre-approved by the Washington County Secondary Road Department.

All contractors desiring to provide dust control services in Washington County shall submit a certificate of insurance in an amount not less than $1,000,000 aggregate with Washington County named as additional insured.

Contractors shall certify that all materials used for dust control are free and clear of toxic materials affecting the environment, the public, and livestock. A listing of ingredients shall be submitted stating the composition and percentage of each ingredient in the mixture. Certification shall state that the mixture meets or exceeds applicable DNR and EPA regulations. The following materials are approved for use as dust control:
Lignin Sulfonate (tree sap)
Calcium Chloride
Soy Oil
Refined Glycerine
Magnesium Chloride
Chip Seal (oil)

Typical Dust Control Application
The typical dust control treatment will be a minimum of 20 feet wide and 50 feet long. The Washington County Secondary Road Department reserves the right to limit the length of a dust control treatment beyond 500 feet in order to ensure the roadway can still be maintained and that it does not appear to the traveling public the road surfacing classification has changed from gravel to a chip seal surface. In addition, the Washington County Secondary Road Department reserves the right to require an application of dust control treatment longer that 500 feet in the event there are 2 or more residents submitting applications within 600 feet of each other on a single stretch of road. The normal annual dust control treatment schedule will be an initial treatment placed approximately during the last 2 weeks of May and the second treatment placed in early-August, weather permitting. For chip seal, only 1 (1) treatment is required per applicant in a calendar year.

Road Surfacing Classification
A road with chip seal applied pursuant to this policy shall remain classified as an unpaved (gravel) road. The applicant shall be required to maintain the chip seal surface as required by the Washington County Secondary Road Department. A road with chip seal as a dust control treatment will continue to be treated as an unpaved road for the purposes of embargoes and snow and ice removal. Nothing in this policy shall be interpreted as placing any limitation on what type of road maintenance the County may perform on any given stretch of road. The applicant Will be responsible to maintain the surface, at the applicant's cost, as directed by the County and as specified in the permit. If the applicant does not maintain the surface, the County may take steps to revert the affected sections of road back to gravel. The County will not provide any reimbursement to participating residents in the event a chip seal application is damaged by the County's road maintenance activities. If a resident discontinues participation in the program, the County may take steps to revert the affected section of road back to gravel.

Chip Seal Treatments
Every spring these treated areas will be evaluated by Washington County Secondary Road staff to determine what, if any or all, will need to be re-treated that season. You will be notified of the area and will be required to file a permit or the treated road will be reverted back to gravel. At any time of the year, the Washington County Secondary Road Department may send a letter of notification to the applicant requesting repairs of the chip seal surface including, but not limited to: patching, distortion of the road surface requiring reshaping of the road and repairs resulting from utility work and road maintenance including culvert replacement. Any area not properly maintained, as required by the Washington County Secondary Road Department, will be reverted back to a gravel surface, and the applicant may file another permit the following year.

Marking Dust Control Area
Each location treated for dust control shall be marked with bright orange plastic flags (5" x 8" with 30" staff) provided by the contractor at no cost to Washington County. The flags shall be placed on both sides of the road at each end of the dust control area and embedded in the road shoulder, at the break of the slope. The flags shall be placed at the time of permit application. Washington County will not be liable for blading through unpermitted and/or unmarked dust control areas.

Permit Applications
The Contractor shall accept the dust control permit applications and collect the permit fee from the applicants.